040 682 9488 +358 40 682 9488 info@tulvari.fi
Hakatie 22
90440 KEMPELE, FINLAND

Technical room and heat pump trays

Tulvari 650 Tulvari 680 Tulvari 720 Tulvari 1200 Tulvari 1400

Other Tulvari product categories: Domestic water | Underfloor heating | Kitchen | Floor units | Wall units


Tulvari trays replace the flooring material under equipment. The products enable the installation of the final heating system for use even before or immediately after the floor is poured. The end result is immediately tidy and finished.

TULVARI 650 – HEAT PUMP TRAY

Tulvari 650

• installed before pump installation on top of the concrete pour
• makes pump installation faster as there is no need to wait for the slab to dry nor for the tiling to be finished
• waterproofing and flooring are installed neatly against the edge of Tulvari
• a heat pump can be taken into use immediately, eliminating the need for expensive construction heaters
• enables the drying of a poured floor using the floor drying programme of the heat pump
• attached to concrete using butyl adhesive

Contents: Protective tray, fixings and installation instructions.
Materiaali: 5 mm ABS-muovi. Paino: 9,5 kg. Mitat: 680×680 mm. LVI-nro: 2078113

Tulvari 650 asennettuna 

 

TULVARI 680 – HEAT SOURCE OR BOILER TRAY

tulvari-680-iso

• installed before pump installation on top of the concrete pour
• makes pump installation faster as there is no need to wait for the slab to dry nor for the tiling to be finished
• waterproofing and flooring are installed neatly against the edge of Tulvari
• a heat pump can be taken into use immediately, eliminating the need for expensive construction heaters
• enables the drying of a poured floor using the floor drying programme of the heat pump
• attached to concrete using butyl adhesive
• compatible with Tulvari 720

Contents: Protective tray, fixings and installation instructions.
Materiaali: 5 mm ABS-muovi. Paino 11 kg. Mitat: 680×700 mm. LVI-nro: 2078119

 

 

TULVARI 720 – RAISED PLATFORM TRAY + PENETRATION PLATE

tulvari-720-iso

• the penetration plate is used to install water pipes in the planned position prior to pouring the floor
• water pipe positions can be freely changed inside the raised platform by cutting the penetration plate,
which makes the tray suitable for all forms of heating
• attached to concrete using butyl adhesive
• installed into a space with a floor drain outlet (e.g. technical room)
• makes installing a raised platform / waterproofing faster and easier, as the tray acts as a mould
• compatible with Tulvari 680

Contents: Protective tray, fixings and installation instructions.
Materiaali: 5 mm ABS-muovi. Paino: 5 kg. Mitat: 720×700 mm. LVI-nro: 2078121

 

 

TULVARI 1200 – TECHNICAL ROOM/CLOSET FLOOR

tulvari-1200

• the protective tray functions as the floor of a technical room/closet
• the tray is connected to a drain outlet, which gathers possible leaks and condensed water
• the solid structure facilitates heat source installation prior to pouring the floor, which means fewer visits to the site!
• a tidy and safe result in one go, with no need for raised concrete platforms or additional waterproofing
• manifolds are installed horizontally, which makes installation easier
• penetrations: main water line, ground loop pipes and garage feeds can be introduced on the level of the back edge,
12 penetrations for 34mm casing, front edge 44 penetrations for 10–28mm and back edge 30 penetrations for 10–28mm underfloor heating or
domestic water pipes

Paino: 26,5 kg. Mitat: 1200×600 mm. LVI-nro: 2078125

Tulvari 1200-korotuskehikko

 

TULVARI 1400 – TECHNICAL ROOM/CLOSET FLOOR

tulvari-1400-iso

• technical room/closet floor for slab-on-ground and hollow-core slab locations
• the protective tray functions as the floor of a technical room/closet, gathering potential water leakage
• installation is easy thanks to the new mounting frame with adjustable height
• no more on-site heating during building as the heat source can be installed immediately after pouring the floor
• a tidy result in one go, with no need for raised concrete platforms or additional waterproofing
• 2 drain connections with a diameter of 32mm, funnelling leaks into the drain
• all the building service systems can be installed on top of Tulvari: heat pump, manifolds, water meter, ventilation unit...
• 6 penetrations for 110/65mm casing, 2 for 50mm casing and 32 for 25–28mm casing,
16 of which can be modified to suit 10–25mm underfloor heating pipe

Contents: cardboard box, protective tray, mounting frame, gaskets for domestic water casing, fixings and installation instructions
Ordered separately:
• underfloor heating gaskets 10–25mm
• can be ordered without the mounting frame

Paino: 20 kg. Mitat: 1390×670 mm. LVI-nro: 2078118